© TIMYO B.V.
TIMYO USER MANUAL EN SKO52021V2
PAGE 47
MANUAL
VANDIJCK
E-BIKES
VD0.1
5.7 Overview of the DP C07 display functions
1:
Menu
You can choose between different display modes. You can choose between different levels of
brightness, from level 1 (muted) to level 5 (bright).
2:
Indication of speed
You can choose between km/h or miles/h. Display for current speed (SPEED), maximum speed (MAXS),
and average speed (AVG)
3:
Speed mode
This shows the selected average speed (AVG) and maximum speed (MAXS).
5:
Error code prompt
If a malfunction is detected, this symbol is displayed.
6:
Trip distance indication
This shows the distance traveled during a single trip or the total distance traveled. (Depending on
the selected setting). The maximum distance is reached when 99999 is displayed. The distance of a
single trip (TRIP) or the total distance (TOTAL) can be displayed.
7:
Assist level
This shows the selected level of assistance by the engine (1-5).
8:
Walk assist
When the Walk assist is active, an icon will appear with '6km'. It is activated by pressing the button
for a few seconds. If you release the button again, the walk assist function also stops immediately.
Make sure you NEVER use the walk assist function while cycling!
9:
Lighting
The signs illuminate when the front and rear lights are switched on. The front light, rear light and
display light switch on and off automatically depending on the light conditions.
10:
Distance mode
Either the distance of a single trip (TRIP) or the total distance (TOTAL) can be displayed. The maximum
distance is reached when 99999 is displayed.
11: Battery power
The charging status is indicated by 10 bars. The battery is fully charged when all bars are lit on the
screen. An optimization algorithm ensures a stable display of the battery status. This avoids the
problem of fluctuating battery level indicators in many displays.
1
2
3
7
8
9
10
11
5
6
4
!
