14
Lift from the package the wall stretcher have to be moved as little as possible off the floor.
Make sure during lifting from the package that the wall stretcher is
perfectly balanced and avoid operations that could make it unstable.
6.2. Storage of the wall stretcher
In case of storage for a long period of time (6 or 12 months), proceed as follows:
•
make sure the room where the wall stretcher is placed is dry and that temperature, humidity and
atmospheric pressure values are within the following parameters:
temperature between 0˚ and +40˚,
atmospheric pressure between 700mB and 1060mB
air humidity max 70%
Do not stack the wall stretcher one on the top of the other.
6.3. Transport
The Electric wall mounted shower stretcher art. 155040 and Electric wall mounted changing table art.
155140, manufactured by TIMO d.o.o. Ajdovš
č
ina, are shipped to customers in two parts ( the wall
fitting panel and mattress platform lying part.) The wall fitting pannel have to be fitted to a wall as
described in that instruction in chapter 7. Than you have to fit the mattress platform lying part as
described in that instruction in chapter 7. Transport is generally done by truck. The temperature,
humidity and atmospheric pressure values during transport must fall within the following parameters:
temperature between 0˚ and +40˚,
atmospheric pressure between 700mB and 1060mB
air humidity max 70%
7. INSTALATION
The wall decoration and floor covering must be completed and finished
The wall area is required to be at least 220 cm wide and 160 cm hight, flat,
plumb and clear of any obstacles.
The wall stretcher have to be clear of any side walls, fixtures, handrails or
appliances by 50 mm at the sides and by 400 mm minimum (700 mm mm
recommended) at the front.
Summary of Contents for 155040
Page 27: ...27 Art 155140 ...
