13.03.2019 | V1.81
5 | 9
Overfill Prevention Controller EUS-2 |
Technical Description
[email protected]
www.timm-technology.de
For installation at the
vapour recovery
arm
(close to coupling):
EUS-1-STG11
: disconnector socket
unit to connect a plug-in coiled ca-
ble type EUS-1-SSK3. With 11 m
straight cable to the control unit
and a cable mounting set for cable
installation at the vapour recovery
arm.
EUS-1-STG11P:
same as type above-
mentioned, but with additional
truck socket for detecting the
‘truck connector in park position’
status by integrated socket code
generator.
4.3.
Testing Equipment
The functioning of the control unit can
easily get checked by using the special
testing equipment. It is equipped with a
socket for connecting to the truck con-
nector cable as well as with different test-
ing switches to simulate the criteria
‘grounding’, ‘vapour recovery hose con-
nection’ and individual ‘sensor status’.
The testing equipment is available with
sockets according to EN 13922 or API RP
1004.
Figure 6: Dual disconnector junction box
EUS-1-ST2P2
Figure 7: Disconnector socket unit
Figure 8: Testing Equipment EUS-TST3
