4
5
NTTWIFI MAC address and ID Wi-Fi number label
Important: Do not remove this label from the side of the product.
4. Contents
• 1x NTTWIFI time switch
• 2x Mounting screws
• 2x Cable clamp set
• 1x Plastic insert
• 1x Tamper-proof cover
• 1x Instruction manual
Note: all instructions are to be left with the customer after installation.
5. Installation
The NTTWIFI is a Wi-Fi controlled time switch which surface mounts.
There is provision for two front cables, with built in cable clamps.
The contacts are not volt free. There is a loop terminal for earth continuity.
5.1 Ensure the mains supply is switched off and the circuit supply
fuses are removed or the circuit breaker turned off.
5.2 Remove the terminal cover by undoing the fixing screw
on the bottom of the time switch.
