15
16
Positive Affirmation of ON/OFF Status
• With output status not enabled (default), the advance button shows
red OFF, green ON.
• Output status will not work unless there is more than a 10W load
present. There will still be an output, but this will not show on the
device home screen. At loads below 10W, the advance button will
remain red, but show the word ON to show that it is a programmed
ON period, but the device cannot detect a load.
• Output status shows that the device is working, and will only show
a change of state if there has definitely been a change of output
state (above 10W).
• With output status enabled, the advance button will show what is
happening with the output. There is an icon on the home screen
which shows that this feature has been enabled.
• If there is no load detected during an on period, the advance
button will show red, ON. This is a fault condition, as the output
is not detected.
• Once the output has been detected, the advance button
shows green, ON.
• If there has been a load measured at some point in the ON period,
but the output can no longer be detected, the indicator will show
orange (stand by), until the load is detected again, when it will
show green. This is common when the output has a secondary
control, such as a thermostat.
