3
4
5. Installation
• Ensure the mains supply is switched off and the circuit supply fuses
are removed or the circuit breaker turned off.
• An isolating switch should be installed to enable the power to be switched
ON & OFF for maintenance purposes and to activate the manual/auto
override function.
• Remove the wall plate by unscrewing the retaining screw (See diagram “F”)
and with a screwdriver gently push down and ease out the wall plate.
• Mark the position of the fitting holes using the wall plate as a template.
Drill out the mounting holes taking care to avoid any joists, electrical cables
or water/gas pipes that may be hidden beneath the surface. Insert the
rawl plugs into the holes.
Diagram D
Diagram G
Diagram E
Diagram H
Diagram F
Lens Mask
Restrict long detection Restrict short detection
Restrict RHS detection Restrict LHS detection
Dusk/Dawn
Holiday Mode
Time
Less
sensitive
More
sensitive
TOP VIEW
200º
SIDE VIEW
12m
2.5m
Lens Mask
Restrict long detection Restrict short detection
Restrict RHS detection Restrict LHS detection
Dusk/Dawn
Holiday Mode
Time
Less
sensitive
More
sensitive
TOP VIEW
200º
SIDE VIEW
12m
2.5m
Lens Mask
Restrict long detection Restrict short detection
Restrict RHS detection Restrict LHS detection
Dusk/Dawn
Holiday Mode
Time
Less
sensitive
More
sensitive
TOP VIEW
200º
SIDE VIEW
12m
2.5m
Lens Mask
Restrict long detection Restrict short detection
Restrict RHS detection Restrict LHS detection
Dusk/Dawn
Holiday Mode
Time
Less
sensitive
More
sensitive
TOP VIEW
200º
SIDE VIEW
12m
2.5m
Lens Mask
Restrict long detection Restrict short detection
Restrict RHS detection Restrict LHS detection
Dusk/Dawn
Holiday Mode
Time
Less
sensitive
More
sensitive
TOP VIEW
200º
SIDE VIEW
12m
2.5m
