1
2
LEDPRO50WH & LEDPRO50B
• 50W LED Non replaceable lamp
• Energy Usage:
50Kwh/1000h
• Lumen Output:
Black: 5300lm, White: 5300lm
4. Installation
• Ensure the mains supply is switched off and the
circuit supply fuses are removed or the circuit
breaker turned off.
• An isolating switch should be installed to the
switch the power ON & OFF to the luminaire.
This allows the unit to be easily switched OFF for
maintenance purposes.
• Mark the position of the mounting holes
on the wall using the U bracket supplied
as a template.
• Drill the holes for the wall plugs ensuring
not to infringe with any gas/water pipes
or electrical cables that may be hidden
below the surface.
* 10W & 20W use 6mm screw peg
* 30W & 50W use 7mm screw peg
• Fix the U bracket to the wall using the
correct screws for the wall plugs installed.
Note: Ensure that when you mount this,
the slots at the end of the bracket open
upwards to allow you to easily attach and
secure the floodlight when ready.
• Secure the supply cable into the
junction box through the hole(s)
provided ensuring that a cable gland,
grommet or sealing compound is used
to maintain the IP rating of the
luminaire.
Ø 6mm or 7mm
