Retry Punch Period
Every
punch is displayed on the clock as "In"; nevertheless, the system
identifies the second punch as "Out". It is possible to define a number of
minutes between two subsequent punches, and as a result, only the first punch
takes effect.
Any punch identified within the defined minute range is not saved, and any
punch identified after the minute
range is registered as “Out”.
This value defines the following:
•
Minimal number of minutes between In and Out.
•
Maximal number of minutes between two In punches.
Most commonly, a range of 3-5 minutes should be OK; this is to be decided by
the enterprise owner.
When the punch is identified for the first
time:
1. The word
“Verified!”
is displayed
2. The time-
clock announces “Thank
you”.
3. The punch is recorded.
Figure 12. After the first punch:
“Thank you”
If a second attempt is done within the
defined minute range:
1.
The word “
Thanks
”
is displayed.
2. The time-
clock announces “Punch
accepted”
3. The punch is not recorded.
Figure 13. After the second punch:
“Punch accepted”
