NOTE*
If a constant display of the date is desired, the “Time” field can be set to 0 seconds, and the
“Date” field can be set to any value greater than 0.
3.1.4.5 Date Offset
This field is used to select a forward offset, in days, to the current date. If the “Date Offset” value is
selected as 0, the current date will be displayed.
3.1.5 Other
3.1.5.1 Unit Name
This can be any alpha numeric name up to 20 characters long.
3.1.5.2 Password
The password field displays the current password. To change it, enter a new password, push Set and
Restart Clock. TMPC passwords are limited to12 characters. The default password is “
tmachine
”
3.1.6 Alarms
The TMPC has the capability of signaling 24 alarms throughout the course of a single day. Alarm
entries are to be separated by semicolons with no spaces. The hour, entered in 24 hour time, at which
the alarm is to be set off is entered first and followed by the minute, the two are to be separated by a
colon. The last entry is the duration, in seconds, that the alarm is to sound, it is limited to a maximum
of 59 seconds. The minutes and seconds are to be separated by a single dash. Simply delete an alarm
from the alarm field and click “Save Settings” to disable it or enter a duration of zero. Any invalid
values entered into the alarms field will be truncated to zero. The default setting is to have no alarms
set.
Example alarm string:
8:0-3;12:0-3;13:0-3;17:0-3
This example string sets 4 alarms all on the hour and for a duration of 3 seconds.
Installation and Operations Manual | Page 10
Web / timemachinescorp.com Email /
Phone / (402) 486.0511
