Timberk TMS 08.CH, Instruction Manual

Page: 6 / 36

Remote controller ( g. 3 )
The remote controller should be directed to the signal receiver, located on the control unit.
The control unit con rms receipt of a control command by a sound signal.
Mounting of batteries
The remote controller is power supplied from two AAA batteries (not included in the scope
of delivery), installed in a special compartment whose cover is located on the back panel of
the remote controller. To mount batteries:
1. Remove the cover of the battery compartment by sliding it along the direction of the
arrow.
2. Mount batteries, observing speci ed polarity.
3. Place the cover back.
I MPORTANT!
1 . Prevent contact of the remote controller with water and other liquids. Prevent
contact of the remote controller with direct sunlight and do not leave it nearby
heaters and electric appliances.
2 . Prevent contact of direct sunlight with the infrared signal receiver.
8
6
w ww.timberk. com remote control block