7
Radio Control
Setting Up a Duplicate Remote
If you want a backup for your primary remote, you
can quickly duplicate the current remote. When this
procedure is complete, any change made with one
of the remotes also affects the operation of the other
remote. Follow this procedure:
1. Mark the original remote.
2. Remove the battery cover from the duplicate remote.
3. With a paperclip,
press and hold the
MASTER RESET
button on the backup
remote for
approximately 10
seconds. The
Indicator Light on the
front of the remote
starts flashing red.
4. Place the marked original remote within 18" of the backup
remote and press the OPEN button on the marked original.
The Indicator Light on the backup remote stops flashing.
5. Replace the battery cover on the backup remote. It is now
ready for use.
MASTER
RESET
18" or Less