SPECIFICATIONS:
-
Power supply:
12 volt DC supply
-
Wheel thickness:
1/8 inch (3.2mm) and 3/16 inch(4.7 mm)
-
Maximum speed:
5500 rpm
-
Type of chains:
pitches 1/4” ; .325” ; 3/8”
-
Weight sharpener:
4.5 lbs (2 kg)
-
Accessories:
1 dressing stone; 1 measuring guide. 2 wheels (thickness: 1/8”-3.2mm, 3/16”-4.7mm).
INTRODUCTION
-
Save this manual, do not discard or throw away.
-
READ THIS MANUAL FIRST.
To ensure the correct use of the grinder and to prevent accidents, do not start working
without reading this manual carefully. This manual explains operation and maintenance of this sharpener.
-
To guarantee efficient and consistent operation of sharpener, ALWAYS check and replace any worn or broken parts
using ORIGINAL SPARE PARTS ONLY.
For parts or information call: 952-945-9058.
8am to 5pm, USA Central Time.
SAFETY RULES
1.
Sharpener is for adult use only. Users must be in good physical and mental condition, and be familiar with the
instructions before use.
2.
NEVER wear rings, bracelets and/or loose clothing that could come into contact with the grinding wheel.
3.
ALWAYS wear safety gloves and approved protective eyewear while operating or maintaining the
sharpener
4.
NEVER stop the grinding wheel with your hands, even after stopping the motor.
5.
Check that all power is disconnected when changing grinding wheels, during maintenance, or transporting.
6.
NEVER start the sharpener without the wheel guard in place. The guard is supplied in the sharpener package and
must be installed before operation. The guard can be removed ONLY for wheel replacement; then, it must be reinstalled.
7.
Check that the voltage and frequency indicated on the sharpener correspond to supplied power.
Never use an alternative rated power supply, as this will damage the sharpener.
8.
Never use defective and/or non-standard cables, plugs or extension cables.
9.
Remove power or cables immediately if cables show signs of damaged or are cut.
The power supply cables are complete with terminals. Never use cables that are manipulated in any way.
10.
Before starting up the sharpener, check that the working area is free of tools or other objects.
11.
Check the cable position during operation, making sure that cable stay away from grinding wheels during operation.
Never work near other electrical cables.
12.
Never advance the chain with your hands until the grinding wheel has moved entirely back to the upright position
(non- cutting position).
Safety gloves should be worn at all times.
13.
Other than the operator, keep all humans and pets at least 10’ away from work area during its operation.
14.
Before starting the grinder, ALWAYS check that the grinding wheel is correctly installed and not damaged.
15.
Always work in a stable and safe position.
16.
Always follow maintenance instructions closely.
17.
Before using the sharpener, check that all safety devices are properly working.
18.
NEVER work with a damaged, improperly repaired, or modified sharpener. NEVER remove, damage, or disconnect
any safety devices.
19.
Never use the sharpener as a cutter or for grinding objects other than saw chains.
20.
Operators should be have read manuals and be familiar power tools.
21.
When not in-use, store the sharpener in a dry place, out of reach. Keep away from children.
22.
Do not use in a place where children may be present.
23.
The sharpener-motor can be used continuously for 20 minutes; then, it needs to be turn off to cool down to avoid
possible damage from over- heating.
24.
Never allow the sharpener near wet areas/environments, or in any place accessible to children.
25.
Never use near or expose sharpener to any explosive or flammable liquids or environment.
26.
ALWAYS dispose sharpener properly, check with local laws for disposing products.
27.
If sharpening a chain on an electrical saw, ALWAYS disconnect the electrical saw POWER CABLE.
30.
NEVER start the sharpener with hands or fingers touching or near wheel.
31.
NEVER force the sharpener or any tool while working, maintaining or sharpening.
