2
mobility. This self propelled wheelchair can also be pushed by the
accompanying person. It is suitable for indoor and outdoor use.
3.
Assembly
Step 1. Unfolding the wheelchair
Place the wheelchair on the ground. Grab the hand grips which are at
the back of the backrest and unfold the wheelchair. Then, press the
front and rear edge of the seat so that all the elements fit together.
Note! Do not pull the armrests and transverse stabilization strongly.
Step 2. Assembly of footrests
Assemble the right and the left footrest in the front part of the frame
by placing them on two pins and turn them inwards until they are
locked.
Fix protective straps.
Step 3. Assembly and adjustment of footplates
To set the height of the footrest, unscrew the wing screw and tighten
locking pin. Extend or shorten the length of the footrest by pulling its
bottom part until the locking pin clicks. After setting appropriate
height, tighten the wing screw. Proper space should be left between
the footplates and the ground as footplates set too low may cause
difficulties in overcoming such obstructions as curb. Adjust the
footplates so that the angle between trunk and thighs is 90
0
(optimum
sitting position is provided to the user, then).
On completion of the above activities, the wheelchair is ready to use.
FOLDING
•
Fold the right and left footplate by grabbing its bottom part and
pull it upwards. Next, grab and pull the locking lever, turning
simultaneously the footrest outwards, and remove the footrest
from the mounting opening.
