3
•
Pull the seat upwards by holding the front and the back edge in
the middle, so that the frame jumps out from the connecting
elements.
DISMANTLING FUNCTION OF ARMRESTS
•
To dismantle the armrest, press the locking pin located at the
front part of the armrest and remove the whole armrest from the
mounting openings.
•
To re-assemble the armrest, put the back part of the armrest into
the mounting opening and close the armrest until the locking pin
clicks.
WHEEL LOCKS
The wheelchair was equipped with wheel locks to block the wheels.
•
To lock the wheels, push the wheel lock lever forwards until the
wheel is fully blocked (separately for left and right wheel). Please,
note that the wheel lock only serves to lock the wheel when the
wheelchair is at a complete stop.
WHEEL LOCKS ADJUSTMENT
The correct lock of the wheel lock depends on its adjustment and
position. The handle of the wheel lock should be positioned so that the
wheel lock shoe blocks the wheel firmly and the lever does not face
excessive resistance.
•
In case of excessive resistance, pull the handle forwards slightly by
twisting off the locking screw which is located on the other side of
the wheel lock (from the inside of the wheelchair). Set the wheel
lock shoe in such position that the wheel lock blocks the wheel
easily without resistance.
•
When the wheel lock shoe does not touch or lock the wheel
sufficiently, follow the above instruction by moving the handle in
the opposite direction.