Authomatic regulation of
Combustion rate, and thus the amount of heat generated by stove, depends on the amount
of primary combustion air delivered to the space below the roast grid. The regulation of
primary air is accomplished automatically by draft regulator R
When firing, control button located on the frame of the stove, turn to fully open flap in the
direction shown in Figure 6. During the operation, depending on the temperature, the
regulation valve will open and close automa
set one, turn regulator button to the desired position of minimum open flap, which closes the
regulator flap.
Authomatic regulation of stove’s operation
Combustion rate, and thus the amount of heat generated by stove, depends on the amount
of primary combustion air delivered to the space below the roast grid. The regulation of
primary air is accomplished automatically by draft regulator Rathgeber (Figure 5).
Figure 5
When firing, control button located on the frame of the stove, turn to fully open flap in the
direction shown in Figure 6. During the operation, depending on the temperature, the
regulation valve will open and close automatically. If you want a lower temperature than the
set one, turn regulator button to the desired position of minimum open flap, which closes the
Figure 6
12
Combustion rate, and thus the amount of heat generated by stove, depends on the amount
of primary combustion air delivered to the space below the roast grid. The regulation of
athgeber (Figure 5).
When firing, control button located on the frame of the stove, turn to fully open flap in the
direction shown in Figure 6. During the operation, depending on the temperature, the
tically. If you want a lower temperature than the
set one, turn regulator button to the desired position of minimum open flap, which closes the
