TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300-3 Installation & Operating Instructions
TiL 11RE436
2-1
SECTION 2 – OPERATING
INSTRUCTIONS
2.1
GENERAL
A 6-line display and a keypad and a rotary knob provide the operator control of up to 5 RF
modules installed in the unit. The display is showing the activity of all 5 modules (bands) as well
as the menu of the active band, selected by pressing the BAND key. The knob has multiple
functions including volume, and channel. The microphone, key line and headphone audio can be
wired separately for each of the 5 bands therefore switching from band to band is performed at an
audio panel such as the Technisonic A71X series. This allows for separate and simultaneous
operation on each of the bands just like having 5 separate radios. The transceiver can also be
connected so that all bands are available on the combined output. In this configuration, the BAND
key on the transceiver must perform switching between bands. It is possible to connect the
transceiver such that both methods are used.
2.2
FRONT PANEL
Refer to the diagrams below:
FIGURE 2-1 Front Panel Controls – TDFM-7300-3 Transceiver
Summary of Contents for TDFM-7300-3
Page 2: ......
