TECHNISONIC INDUSTRIES LIMITED
www.til.ca
TDFM-7300-3 Installation & Operating Instructions
TiL 11RE436
1-3
TDFM-7300-3 Model Variations with type II Modules (-3,-4)
4-Band TDFM-7300-3 Model Variations
TDFM-7300-2, P/N 061245-3-73YXXX/P73ZZZ
GREEN display.
TDFM-7300-2, P/N 061245-4-73YXXX/P73ZZZ
RED display.
TDFM-7300-2NV, P/N 061245-3-73YXXXNV/P73ZZZ
GREEN NV display.
5-Band TDFM-7300-3 Model Variations (-73YXXXX)
TDFM-7300-2, P/N 061245-3-7YXXXX/P73ZZZ
GREEN display.
TDFM-7300-2, P/N 061245-4-7YXXXX/P73ZZZ
RED display.
TDFM-7300-2NV, P/N 061245-3-7YXXXXNV/P73ZZZ
GREEN NV display.
Y is a UHF analog module.
X is type II digital module represented by:
P73ZZZ represents a 4 or 5 digit project
1 for VHF (138-174MHz) module
number that identifies specific options that
4 for UHF Lo (380-470MHz) module
are contained in the modules. P7301 and
5 for UHF Hi (450-520 MHz) module
up project numbers are used in transceivers
8 for 700/800 MHz (764-870)
with type I or type II modules.
Digital module numbers may be specified in any order required. The analog module is always placed on
line 5 of the display. If only 3 digital modules are ordered line 4 of the display will be blank. Hybrid units
that contain a mix of both type I and type II modules will have 061245-3 or –4 part numbers. At this time
only the VHF Lo analog module is available. Contact Technisonic for availability of other analog modules.
All model variations are capable of supporting both 28 Volt DC and 5 Volt AC back lighting. The units are
shipped set to operate on 28 Volt back lighting. Equipment can be set to operate on 5V back lighting by
using the software based configuration menu. See Section 2.18 configuration menu.
Summary of Contents for TDFM-7300-3
Page 2: ......