18 |
P a g e
Tigo Energy, Inc.
|
www.tigoenergy.com
|
Lower
battery
Upper battery
1)
Locate the cables labeled for the upper battery module and cut
cable ties to free the cables.
2)
Connect the
Upper Bat
PCS
cable to the battery terminal labeled
PCS
.
3)
Connect the
upper BAT
link-out
cable to the battery port
labeled
link-out
.
4)
Connect the
upper BAT
+
plug to the red battery terminal
labeled
+
.
5)
Connect the
upper BAT
-
plug to the black battery terminal
labeled
-
.
Figure 19 Upper battery connections
Lower batteries
Note:
IF INSTALLING ONLY ONE EI BATTERY ENCLOSURE, a terminating cap is required in
the
CAN/COM
port in the right-side
battery expansion wire box
(
12
). Do not
remove this cap.
Inner battery
1)
Locate the cables labeled for the lower battery modules and cut
cable ties to free the cables.
2)
Connect provided
lower inner BAT link-out
cable (loose cable) to
the lower inner battery terminal labeled
link-out
.
3)
Connect the opposite end of the
lower inner BAT link-out
cable
from step 2 to the
link-in
terminal on the lower outer battery.
4)
Connect the
lower inner BAT link-in
cable to the lower inner
battery
link-in
terminal.
5)
Connect the
lower inner BAT +
plug to the lower inner battery red
terminal
labeled
+
.
6)
Connect the
lower inner BAT -
plug to the lower inner battery
Figure 18 Upper
battery module
Figure 20 Lower
battery modules
