TIGIEFFE Airo X Series, Use And Maintenance Manual

Page: 44 / 124

Use and Maintenance Manual - X Series Page 44
6-1: Fastening holes
6-2: Forks chocks
After placing the machine onto the carrying vehicle, fasten it by means of the same holes used for lifting.
To avoid breaking the platform overload controller, thus causing the machine to stop, DO NOT fix the
machine to the vehicle base by tying the platform (any model) or the last lifting arm.
Before carrying the machine check the stability grade. The platform must be fully lowered and the platform
extension must be in retracted position to ensure adequate stability during the entire operation.
6.2.1 Removable guard rails
Standard machines are fitted with guard rails which can be removed from the platform. Removing the guard rails it is possible to
reduce the height of the machine for:
 carriage
 passage through lowered areas (e.g. doors).
To remove the guard rails remove the fixing screws.
Make sure the guard rails are properly secured before using
the machine.
WARNING!
This operation is only for reducing the height of the
stowed machine to facilitate carrying operations.
It is absolutely forbidden to lift the unit with personnel on
the platform if the guard rails are not raised and fixed.
6-3: Removable guard rails