For assistance with installation, call us at 507.246.3545
2 - Install Seat Bottom Cover
q
2.1 - Place cover over seat bottom, making sure buttons on front of seat line up with the cutout in the front of the
cover.
q
2.2 - Pull strings tight, and secure using the StringLock device (see next page). The tighter, the better. This is what
keeps your cover from shifting.
q
2.3 - Pull fabric straps from front of seat across seat bottom. Pull front and rear straps as tight as possible and fasten
Velcro together. When running straps across seat bottom, ensure that the four mounting holes (circled in red
above) are not covered by the straps.
q
2.4 - Put the seat bottom back on the frame, lining the four mounting holes up with the plastic tabs on the seat frame.
q
2.5 - Press down on the seat bottom and slide back while pulling up on the seat adjustment lever. This will mount the
seat back on the frame.
q
2.6 - Press the bottom of the seat cover behing the plastic trim of the seat. You may use a flat screwdriver to do this
without damaging the cover.
