For assistance with installation, call us at 507.246.3545
1 - Preparation
q
1.1 - Raise seat to the highest position and slide forward.
q
1.2 - Remove seat bottom.
q
1.2.1 - Using a small pick, release the driver’s side of the seat bottom by inserting a small pick near the front
of the seat and pushing up to release the reataining clip. Pull the seat bottom forward.
q
1.2.2 - Repeat on the passenger’s side of the seat bottom.
q
1.2.3 - Note - If you are doing this alone, you will need to use a small flat screwdriver to keep the seat
adjustment lever from latching. When the seat is slid forward, push the screwdriver in to the last hole of
the adjustment mechanism, above the latch peg.
q
1.3 - Slide the seat bottom forward and lift off the frame.
Seat bottom release tab on front of seat.
Two per seat bottom.
