22
List Screen
The List screen is used to process cut lists.
The List screen can always be accessed by touching “List” at the top of the screen.
Display:
• Length is the back-fence length of the specified part.
-
Back-fence length is the dimension of the part in contact with the back fence during processing.
• Angle1 is the downstream or lead angle.
-
The lead angle is the first angle to be cut.
-
A positive miter angle points the blade toward the outfeed.
• Angle2 is the upstream or trailing angle.
-
The trailing angle is the second angle to be cut.
-
A positive miter angle points the blade toward the outfeed.
Control:
• Tap “Load” in the upper left to load a .tiger file.
• Press the orange [Start] button to begin cutting a list.
• Touch the red [Stop] button to interrupt a movement or stop processing the list.
• Tap “Save” in the upper left to save progress on the current list as a .tiger file.
TigerTouch
Summary of Contents for TigerSaw Miter
