TIGERFLEX
®
SHIPLAP APEX GENERAL ASSEMBLY GUIDE
14
tigersheds.com
0113 205 4189
Step 3:
DOOR INSTALLATION (cont.)
• Check you have all components before starting.
• Mark the position of the holes required for the hinge plate & drill a hole for the bolt (8mm / 5/16”).
(Detail I)
Secure large bolt through drilled hole.
• Ensure that the plate is positioned in such a way that when the bar is in the locked position it covers the
head of the bolt.
(Detail J)
• When firmly fixed, raise the bar horizontally across the door and position the angle plate so that the padlock
holes are aligned,
(Detail K)
leaving a small gap of approximately 1 to 2mm between them.
(Detail L)
This should be
just enough room to allow the bar to swing to and from the angle plate without jamming.
• Fix the angle plate so that when the bar is in the locked position it covers the bolt head.
• With the bar in the locked position mount the door cleats evenly along the bar. Make sure that the cleats are
flat against the door and not jamming against the bar. If the cleats are set too high or low they will prevent the
bar from closing properly and the padlock won’t align.
(Detail M)
SINGLE SECURITY DOOR
(Fitting Security Bar External)
I
J
K
L
M
BS25 2TBB N40