Tiger SABER BOOM JD6145-55M/R T4F, Mounting And Operating Instructions

Page: 41 / 266

ASSEMBLY
Assembly Section 2-9
SIDE MIRROR MOUNTING
Disassemble the right side mirror bracket. Cut the square rod and pipe (shown in picture
below) 6-1/4”. Assemble them together. Mount the right mirror bracket and hardware on the
upper right corner of the tractor cab as shown in picture below. Refer the Parts Section--
safety screen, cab for hardware details.
(ASM-JD7220-0001)
MAINFRAME INSTALLATION
With an overhead hoist and / or jack-stands, raise one side of the frame up to the correctly
matching mounting holes. Install capscrews and other hardware to secure the sides of the
mainframe to the tractor casting, as shown on the tractor mount kit page in the Parts Section.
DO NOT tighten at this time. Remove the capscrews one at a time and apply a thread locking
agent. Reinsert the capscrews and tighten / torque to values noted in the torque chart located in
the Maintenance Section of this manual.
(ASM-C-0003)