5
Clean the product on the same day after every use.
Use mild kitchen detergent (for table or cookware).
Use a soft sponge or cloth.
Clean the product thoroughly to prevent any odor.
How to Clean
If an odor remains on the gasket
Depending on the contents, the odor may remain on the gasket. In this case, leave the
gasket in boiling water for approximately 30 minutes to reduce the odor. If the odor is
still noticeable, purchase a new gasket (sold as an optional part).
After drinking the beverage, keep the product in an upright position
and securely close the lid. Slide up the safety lock.
(1)Wash each part using a sponge with diluted detergent water or lukewarm water, and
then thoroughly rinse it with water.
(2)Wipe the water off with a dry cloth and dry the parts thoroughly.
6
Make sure the product does not suffer any strong impact while carrying it.
The lid may open.
If you place the product in a bag, make sure it is upright to prevent any accidental
leakage. The product may leak if you place it on its side.
If you place the product in a bag, make sure the button keeps away from bag
contents. The lid may open.
Do not soak the body and lid when washing them. (Water may enter.)
After washing the whole body, immediately use a dry cloth to wipe off the moisture on
its outer surface. Not wiping off all droplets could leave water stains or cause rust and
other marks.
Do not use thinners, cleansers, bleaches, cleaning wipes, metallic scrubbing brushes,
or nylon scrubbing brushes.
Do not use a dishwasher or dish dryer, and do not wash with boiling water. (Except
gasket)
Be sure to attach the gaskets and spout.
Dry the body and lid completely after removing stains when not in use for a long time.
Caution
Caution
Caution
Caution
6
Attaching and Removing the gasket
If marks start to become visible on the inside of the main body
Such staining can be caused by minerals in water, such as calcium, magnesium, and iron. It is
recommended to clean them with citric acid, which is available at supermarkets and drug stores.
(1) Dilute the citric acid (approximately 10 g) in lukewarm water, and then pour it into the main body.
(2) After a few hours have elapsed, wash the main body with a soft brush and then thoroughly rinse it.
(3) Dry the main body completely.
Note: Do not use detergents for other brands’ pots or insulated bottles. The gasket may be broken.
For red, rust-like spots or rough areas
Do not attach the gasket in the incorrect place or direction. The contents
may leak.
Attaching and Removing the lid gasket
To remove
To attach
Slowly remove the lid
gasket while holding
and turning it.
When attaching the
lid gasket, make
sure to fit it
completely in the
proper direction.
Slowly remove the stopper gasket while holding its edge.
When attaching the stopper gasket, make sure to fit it completely in the proper direction.
Caution
Caution
To remove
To attach
Push the hinge
side slowly to
remove.
Spout can not
be removed,
even if its front
side is puhed.
After fitting the
front side of
spout, set the
hinge side.
Make sure the
spout is fixed.
Attaching and Removing the spout
Attaching and removing the stopper gasket
Spout
Hinge
