43
42
43
English
Symptom
Check point
Action
Reference
page
Nothing happens when a key is
pressed.
Is the power plug properly connected
to an outlet?
Insert the power plug fully into an
outlet.
16
Is the Keep Warm lamp on?
Press the [KeepWarm/Cancel] key
to turn off the Keep Warm function,
then try the operation again.
16
The lid will not close, or it opens
during cooking.
Are there any grains of rice adhering
to the upper casing, lid gasket, or
around the hook button?
Completely remove all remaining
rice.
15,
32-35
There is a smell of plastic.
Such smells may occur when the rice cooker is first used, but they should
go away over time as the rice cooker gets used.
–
There are stripes or waves on plastic
parts.
Such stripes and waves are produced when the resin is being molded.
They do not affect the performance of the rice cooker.
–
Food adheres to the inner lid during
concurrent cooking.
When cooking with ingredients that expand during heating, such as eggs
and the like, some of that may adhere to the inner lid. If it is bothersome,
reduce the amount of the ingredients.
24
If these indications appear
Display
Action
Reference
page
“Err” appears on the display and a long-
lasting or continuous beeping alarm
sounds.
If the rice cooker still does not respond, there is problem with the unit
itself. Disconnect the power plug and contact TIGER CORPORATION
U.S.A.
–
Plastic parts
Plastic parts that come into contact with heat or steam will deteriorate over time. In this case, contact
TIGER CORPORATION U.S.A.
1
Connect each end of the power
cord to the specified locations.
Appliance plug
(1) Connect
(2) Connect
Power plug
2
Display the time setting mode.
Press the [Hour] or [Min] key to display .
On
3
Set the present time.
Set the hour with the [Hour] key
and the minute with the [Min] key.
Hold down the corresponding key
to change the time more rapidly.
4
Once you are finished setting
the time, press the [Menu] key.
The present time is set.
will go out and “:” will blink on the display.
Blinks
• To cancel setting the time, press the
[KeepWarm/Cancel] key.
Setting the present time
The present time is displayed in a 24-hour format.
The time cannot be set during cooking, when the Keep Warm function is on, or when the Timer function is in
use or during reheating.
Example: Changing the present time from “9:30” to “9:35”
