8
5. SAFETY MEASURES
5.1 SAFETY SYMBOLS
Safety alert symbol is used in conjunction with following Signal words, according
to the degree of possible injuries that may result operating the implement;
DANGER
identifies the most serious
hazards, if not avoided, will result in death
or serious injury.
WARNING
indicates a potentially
hazardous situation that, if not avoided,
could result in death or serious injury, and
includes hazards that are exposed when
guards are removed. It may also be used
to alert against unsafe prctices.
CAUTION
indicates a potentially
hazardous situation that, if not avoided,
may result in minor or moderate injury. It
may also be used to alert against unsafe
practices.
IMPORTANT
indicates instruction or
procedure that, if not observed, can cause
damage to equipment or environment.
NOTE
indicates helpful information.
READ
– UNDERSTAND – FOLLOW, the safety messages following the Safety
Alert symbol and Signal Words. Failure to comply with safety messages could
result in serious bodily injury or death.
5.2 FOLLOW GENERAL SAFETY INSTRUCTIONS
The machine must be used only by authorised and well-trained
operators. The operators must have read and understood the
instructions of this manual. They must make adequate preparation for
the proper use of the machine and in case of doubt about the use of
the machine and/or the interpretation of this manual the operator must
contact the Manufacturer or the Dealer.
The manual must always remain with the machine. In case of loss or
damage, request a new copy to the manufacturer or your Dealer.
Follow strictly the rules prescribed by the safety pictograms applied to
the machine.
Be sure that all safety pictograms are legible. If pictograms are worn,
they are replaced with others obtained from the Manufacturer and
