11
Stop operating immediately if blades strike a foreign object. Repair all
damage and make certain rotor and blades are in good condition
before resuming operation.
Avoid clutch’s overheating caused by too long or frequent slipping of
the clutch, since it can damage the clutch components. Before
checking slip clutch, make sure it has cooled. Clutch could be
extremely hot and cause a severe burn.
Prolonged use of the implement can cause overheating of the
gearbox. Do not touch the gearbox during use and immediately after, it
could be extremely hot and cause a severe burn.
5.5 FOLLOW TRANSPORTING SAFETY INSTRUCTIONS
Before transporting, determine the stopping characteristics of the
tractor and implement.
Transport only at speeds where you can maintain control of the
equipment.
When driving on roads, the implement must be in transport position
adequately raised from the road surface, with tractor lifting hydraulics
locked so that the Rotary hoe cannot be lowered accidentally.
The implement may be wider than the tractor. Pay attention to
transporting for people, animals, buildings/sheds and/or other
obstacles.
When turning, use extreme care and reduce tractor speed.
Do not operate the tractor with weak or faulty brakes or worn tires.
Always use tractor lighting system and auxiliary lighting system for an
adequate warning to operators of other vehicles, especially when
transporting at night or in conditions of reduced visibility.
In the case of lifting this implement, make sure that any lifting device is
suitable to operate safely, and use only the lifting points prescribed on
Rotary Hoe.
5.6 FOLLOW MAINTENANCE SAFETY INSTRUCTIONS
Perform repairs and replacements part should only be original spare
