15
When machine is attached to tractor, front weights should put through above
mentioned formula. These weights should be calculated according to capacity of
tractor’s lifting weight and packing.
7
USAGE OF MACHINE
7.1 ADJUSTING OF SCRAPER
Scrapers are used for scraping of soils inside of discs during working. Scrapers
mounted to chassis as adjustable. If there are jammed soils between discs,
check and adjust them to 3 -5 mm space and tighten again.
7.2 ADJUSTING OF ANGLE
For adjusting the angle of front and rear battery, loosen the connection bolts that
connect the batteries to main chassis, adjust the batteries angle to required angle
then tighten the bolts.
8
DETACH OF THE MACHINE FROM THE TRACTOR
1.
Park the tractor on a flat surface, pull the handbrake and put the wheel
chock to tires.
2.
Hydraulic arms of tractor should be alignment.
3.
Lower the machine by means of the tractor hydraulic arms.
4.
Wind up the machine support leg and insert the safety pin.
5.
If your machine has shaft dismount the shaft from tractor.
6.
If your machine has hydraulic hoses depressurize the pressure through
tractor’s hydraulic valve and disconnect the hydraulic hoses from the
tractor.
7.
If your machine has electric system disconnect the electric connections
from the tractor when tractor is in stop position.
8.
Pull out the connection pins.
9. MAINTENANCE
