![background image](http://html.mh-extra.com/html/tiger/cb-0050/cb-0050_instruction-manual_1114828006.webp)
www. gerlif ng.com
Unit 1,
'ƌĞĞŶƐĮ
eld Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Email: info@ gerli ing.com
www.tigerlifting.com
Page 5 of 18
Never
shock load chain block , chain or hook.
Never
operate the chain block unless it is rigged to pull in a straight line from hook to hook.
Never
lift a load unless the chain is properly seated in the chain wheel(s).
Never
allow more than one operator to pull on a single hand chain at one time.
Never
allow sharp contact between two chain block s or between the chain block and any obstructions.
Never
drag the chain, chain block or hook along the floor or across other objects.
Never
use the hoist for any unauthorised purpose that is beyond the operation instructions contained in this manual.
Never
use the chain hoist in acidic conditions.
2.
General Information
The information in this manual is directed to the proper use, care and maintenance of the product and does not comprise a
handbook on the broad subject of rigging. Rigging can be defined as the process of lifting and moving heavy loads using
hoists and other mechanical equipment. Skill acquired through specialised experience and study is essential to safe rigging
operations. Remember, proper rigging and lifting techniques are the responsibility of the operator.
Each Tiger chain block is built in accordance with the specifications contained herein and at the time of manufacture
complies with our interpretation of applicable sections of the European s tandard BS EN 13157:2004+A1:2009, the Australian
standard AS1418.2, the American standard ANSI/ASME B30. 16, and the South African standard SANS 1594 . All items come
with a test certificate or an EC Declaration of Conformity stating compliance with the essential health and safety requirements
of the Machinery Directive 2006/42/EC . Tiger chain blocks are third party verified by SGS Certificate Number MDC 1302.
Unpacking
After opening the carton, the product should be carefully inspected for damage which may have occurred during shipment or
handling. Check the chain block frame for dents or cracks and inspect the load chain for nicks and gouges. If shipping damage
has occurred, contact your supplier .
Choose the Right Chain Block for the Job
The load capacity indicated on the unit is the maximum working load limit (WLL) that may be attached. Choose a chain block
with the capacity for the job. Know the capacities of your loads, then match them. The application, environment it is to be used
in, the size and type of load, the attachments to be used and the period of use must
also be taken into consideration in
selecting the right chain block for the job. Remember the chain block was designed to ease our burden, and carelessness not
only endangers the operator, but in many cases, a valuable load.
Hoists are designed to provide a 4 to 1 safety factor. Supporting structures and load -attaching devices used in conjunction
with this hoist must provide an adequate safety factor to handle the rated load, plus the weight of the hoist and attached
equipment. This is the customer’s resp onsibility. If in doubt, consult a registered structural engineer.
! WARNING
Operating a unit with obvious external damage may cause the load to drop and that may result in personal injury and/or
property damage. To avoid injury carefully check unit for external damage prior to installation.
Chain
anch
Hois
ide
label
28/12/2017
www. gerlif ng.com
Unit 1,
'ƌĞĞŶƐĮ
eld Industrial Estate,
Willowburn Avenue,
ALNWICK, NE66 2DG
Email: info@ gerli ing.com
www.tigerlifting.com
Page 6 of 18
3.
Function/Operation
Hand operated manual chain blocks are actuated by pulling on the hand chain that is fitted to a pocketed wheel that when
rotated acts on the brake and either raises or lowers a load.
The hoist may be used at ambient temperatures betwe en -40°C (-40°F) and +50 °C (+122 °F). Consult the manufacturer in the
case of extreme working conditions .
Note:
Before use at ambi ent temperatures of less than 0 °C, check the brake for freezing by lifting and lo wering a small load 2 -
3 times. Before operating the hoist in special atmospheres (high humidity, salty, caustic, alkaline) or handling hazardous
goods (e.g. molten compounds, radioactive materials), consult the manufacturer for advice.
Loads can be move d horizontally with the use of a trolley. Always transport the load in the horizontal direction slowly, carefully
and close to the ground.
Operation
Face the hand chain wheel side of the hoist.
Lifting the load
Pulling the hand chain in clockwise direction will raise the load.
Note:
Depending on the type of load picked up, the lifting height may be reduced for units fitted with a chain container .
Lowering the load
Pulling the hand chain in anticlockwise direction will lower the load.
Note:
The clicking sound of the pawl when a load is being raised indicates normal operation.
Stop operating in the lifting direction when the hook block contacts the hoist body, as noted by the sudden increase
in the hand chain pull or the tipping of the hook block.
The operator must ensure that the hoist is suspended in a manner that makes it possible to operate the unit without
exposing himself or other personnel to danger by the unit itself, the suspension or the load.
Stand clear of all loads and avoid moving load over the heads of other personnel. Warn personnel of your intention to
move a load in their area. When the unit is not in use, position the suspension (e.g. bottom block, load hook) above
normal head height, if possible.
! WARNING
If parts of the hoist are dropped, they can cause injury, death or property damage. Adequately support the hoist during
installation.
! WARNING
28/12/2017