4. Installation of TopJet clix
System Prerequisites
- 16/26 bands with windowed Goshgarian lingual sheaths
- TopJet transpalatal arch (prefabricated or using bending template)
- Dual Top micro implant (JetScrew) measuring: 2.0 mm x 10/12/14
mm, 2.5 mm x 12/14/16 mm and placed in the M4 position
- Off-angle handpiece with a hex driver attachment (113-MJ-204)
- A hooked explorer for activating and deactivating the TopJet
- Ligature cutter to cut the security thread
- TopJet-Pliers: to close the T- connector
- Tweezers: holding the TopJet clix during installation
Insertion in the mouth:
The TopJet must be checked for proper orientation, which is parallel to
the occlusal plane prior to the placement. Depending on the obliquity of
the axes of the screw, the orientation of the C-clip must be adjusted. To
achieve this, the C-clip must be held flat with the Weingart-pliers and bent
back or bent off at the bending point as needed, so that the T-Connec-
tor lies at the D-section of the transpalatal arch (TPA) tension-free. (Fig.
2 – 3 and 7– 9). This bending ensures tension-free placement of the TopJet.
Clip-on: Pushing the C-clip onto the mini-anchor screw
Hold the Topjet with a fixation forceps and position the C-Clip on the screw
head properly. Clip-on: Push the C-clip onto the head of the mini-anchor
screw with gentle pressure using forceps (Weingart-pliers). Caution: The
long end of the C-clip is orientated to median (Fig. 4 – 5). NB: The form of
the C-clip mustn’t be changed. Never bend the long end of the C-clip in-
wards and never change the diameter. Otherwise, the C-clip cannot be re-
moved from the head of the mini-anchor screw.
EN
1 The c-clip ensures easy clip-on / clip-off and secure hold of the TopJet Distalizer at the
neck of the jet screw. The geometry of the C-clip must therefore not be altered!
long end
Diameter (Ø) must
not be changed!
2 Insertion angle of the screw
4 Clip-on the C-clip (before) at the Clip-on
point
3 Bend the c-clip at the insertion angle
5 Clip-on (completet)
„click“
The c-clip in detail
20°
20°
clip-off point
clip-on point
bending point
> Clip-off the C-Clips see Fig. 22
Summary of Contents for TopJet clix Distalizer 250
Page 9: ...English EN Notizen Notes...
Page 16: ...Notizen Notes...
