Need replacement parts?
Take advantage of our online pricing policy at ;
www.rgklife.com
User Manual
Issue No: 16 | 2016
28
Procedure 8
This procedure includes the following: Adjusting / Replacing Wheel Locks
NOTE:
Before adjusting or replacing any style of wheel lock
ensure that the tyres are inflated to the recommended
pressure as indicated on the tyre.
Wheel Locks - Adjustment / Replacement
1. To replace push/pull wheel lock: See Fig 21.
2. Loosen the two allen head screws in the clamp/plate
which secure the wheel lock to the frame. Slide wheel
lock out of clamp/plate. Fit new wheel lock by reversing
procedure.
3. To replace under seat scissor lock: Use same procedure
as push/pull lock. See Fig 22.
4. Adjustment - All wheel lock styles:
5. The wheel lock tyre pressure bar should embed by
5-7mm into the (pneumatic) tyre when engaged. Adjust
to give satisfactory locking of the chair wheels.
WARNING:
After any adjustments, repair or service and before use,
make sure all attaching hardware is tightened securely –
otherwise injury or damaged may result.
WARNING:
If wheel locks do not hold occupied wheelchair in
place please adjust as above, or contact your dealer –
otherwise injury or damages may occur.
WARNING:
The wheel locks are designed to work when your
wheelchair is static. Wheel locks should not be applied
during use and tyre pressure should be as indicated on
the tyre.
User Manual | Procedure 8
Fig 21
Fig 22
