Need replacement parts?
Take advantage of our online pricing policy at ;
www.rgklife.com
User Manual
Issue No: 16 | 2016
21
Procedure 1
This Procedure includes the following: Adjusting / Replacing the Back Upholstery
The backrest upholstery is individually adjustable by
adjusting either the Velcro straps or Velcro securing wings
located under the centre pad.
Adjusting / replacing the back upholstery
To remove back upholstery, remove cushion, release backrest
tail from seat sling, release side securing straps and lift
upholstery squarely off.
To re-fit reverse above procedure. See Fig 12.
Fig 12
Side Securing Straps
Backrest Tail
Seat Sling
WARNING:
The position of the footrest, camber tube and rear seat
height, as well as the tautness of the back upholstery are
directly related to the chairs stability. Any change to one
or any combination of the four may cause the chair to
decrease in stability. Use EXTREME caution when using a
new seating position for the first time.
CAUTION:
Velcro used on upholstery may cause property damage if
contacted closely.
User Manual | Procedure 1
To adjust tension, pull centre pad up from the rear (side
with RGK logo) Re-position side wings to increase/decrease
tension and securely re-fit centre pad.
See Fig 13.
With strap adjustable backrest upholstery use straps to
decrease/increase tension (not illustrated).
Fig 15
Fig 13
Right-hand Side Wing
Left-hand Side Wing
Centre Pad
