D. Insert water flow meter probe into on-board water meter probe dock
, as shown below
Step 3: Assembly using the included by-pass valve
A. Insert blue washers, from parts bag B, into input and output connections on the control valve
,
as shown below
B. Remove the impeller from the outlet animated connector, located inside control valve box
, as shown below
C. Insert the impeller into the animated connector, fan blade side facing down, rotating the
impeller to ensure the grooves of the impeller supporter align with the grooves inside the
bypass valve outlet animated connector
, as shown below
8
ASSEMBLY
INSTRUCTIONS
E
.
Proceed to step 4
