C. Secure the clear drain tubing over a floor drain or other suitable
drain.
Check your local codes to ensure compliance.
STEP 6: Connecting back wash hose to control valve
A. Thread ribbed drain connector, from parts bag b, onto drain connection, as shown below
D. Attach clear drain tube to connector, secure using a hose clamp, from the instruction manual(s)
zip lock packet
B. Secure the clear drain tubing over a floor drain, into a laundry tub, standpipe, or other suitable
drain. Check your local codes to ensure compliance.
C. Leave an air gap of about 1-1/ 2'' between the end of the hose and the drain. This air gap is
necessary to ensure there is no backflow of sewer water into the water softener.
STEP 7: Connect input on control valve to water supply STEP 8:
Connect output on control valve to home plumbing
12
ASSEMBLY
INSTRUCTIONS
