●
Programming Key
Time of Day Indicator
∗
LED, displays the time of day.
∗
LED flashes, reset the time of day
, see page 17,
after electrical service has been interrupted for 3 days or more.
Button Lock Indicator
∗
LED on, indicates the buttons are locked.
and
buttons simultaneously for 3 seconds until the
LED turns off.
∗
To unlock, press and hold both
Program Mode Indicator
or
buttons to view all values.
∗
LED on, enter program display mode. Use
∗
LED Flashes, enter program set mode. Press
or
buttons to adjust values.
Menu/Confirm Button
∗
Press
,
the
LED turns on; enter program display mode, press
or
to view all values.
LED flashes; enter program set mode and press
or
to adjust the
∗
I
n program display mode, press the
values.
∗
Press after all program features are set.
Manual /Return Button
∗
Press the
button in any status and the valve will proceed to the next step. (Example: Press the
b
utton while the
button while in Backwash status and the
valve is in Service status and it will start a manual regeneration. Press the
valve will go to Brine & Slow Rinse instantly.)
∗
Press the
∗
Press the
∗
Press the
Down
and Up
Buttons
∗
I
n program display mode press
∗
In program set mode press
or
buttons to view all values.
or
buttons to adjust values.
∗
Press and hold both
and
button in program display mode and it will return to In Service. button
in program set mode and it will return to program display mode.
MASTER PROGRAMMING
1
4
while adjusting the value and it will return to program display mode directly without saving value.
buttons simultaneously for 3 seconds to unlock the programming functions.
*
*
A flashing dynamic
display
strip
e
indicates the waster softener is in service
A steady dynamic
display
strip
e
indicates the water softener is in the regeneration cycle
