Tibbo DS10x0 Page 19 Programmable Hardware Manual Download

Page: 19 / 570

Embedded Modules

© Tibbo Technology Inc.

- ppp — accesses the Internet over a serial modem (GPRS, etc.).

- pppoe — accesses the Internet over an ADSL modem.

- romfile — facilitates access to resource files (fixed data).

- rtc — keeps track of date and time.

- ser — controls serial ports (UART, Wiegand, clock/data modes).

- sock — socket comms (up to 32 UDP, TCP, and HTTP sessions).

- ssi — controls serial synchronous interface channels (SPI, I2C...).

- stor — provides access to the EEPROM.

- sys — in charge of general device functionality.

- wln — handles the Wi-Fi interface.

Variable Types: Byte, char, integer (word), short, dword, long, real, string, plus
user-defined arrays and structures.

Function groups: String functions, trigonometric functions, date/time conversion
functions, encryption/hash calculation functions, and more.

Detailed Device Info

Note: "SPI connector" is now referred to as "wireless add-on port"

See these topics for more information on various hardware facilities of the EM2000:

General-purpose I/O Lines

Wireless Add-on port, Wi-Fi Communications

Summary of Contents for DS10x0



























































































































































































































































































































































































































































































































































































Search results

Summary of Contents for DS10x0

Reviews:

Related manuals for DS10x0

Brands by name

Popular brands

Tibbo DS10x0, Programmable Hardware Manual

Search results

Summary of Contents for DS10x0

Reviews:

Related manuals for DS10x0

Brands by name

Popular brands