30
7.5.2 Pre-recorded Alarm
<
Pre-recorded Alarm
> record before alarm, or
continue to record after alarm.
(1)
<Channel No.>
Target channel.
(2)
<Pre-recorded Alarm>
Check to enable.
(3)
<Pre-record Time>
Record before alarm.
(4)
<Record Delay>
Continues to record after
alarm.
(5)
<Save>
Save.
7.5.3 Storage Set
<Pack by time>
Pack the record files by time.
<Free Disk>
Pack the record files by size.
<Strategy>
Select how to handle the record files
when the disk is full.
<Stop Rec>
Stop record new files.
<Cycle Del>
Delete the earliest record files.
<Cycle Del (Except Alarm)>
Delete the earliest record files except event record
files.
<Save>
7.5.4 Snapshot Set
(1)
<Channel No.>
Select target channel.
(2)
<Timing capture>
Enable timing capture
(3)
<Interval(s)>
Set how much internval times
between two snapshots.
(4)
<Link FTP>
snapshot and upload to FTP server.
(5)
<Link Email>
snapshot and send to target
email.
(4)
<Save>
7.5.5 Disk Information
<Initialize Disk>
format the disk
7.5.6 Network Storage
(1)
<Device No.>
Select disk.
(2)
<Status>
Show current disk status information
(3)
<Usage>
Shows purpose of disk.
(4)
<IP Address>
Setup IP address of <Network
Storage>.
(5)
<Mapping Path>
Setup disk path of mapping.
