24
7.1.2 Key Region
<Key Region>
To have better image quality
for some regions on the video, there are 4
regions settable for each video.
(1)
<Draw Region>
Use the mouse to draw the key region on the
video.
(2)Click
<Save>
to enable.
(3)
<Delete Region>
delete the drawn regions.
7.2 Camera Set
7.2.1 HD Parameter
Set video image parameter in this page.
HD Param-Model
The system provides 8 video templates for
different application, all the video parameter
can only be revised and saved in the template.
(1)
<Current>
Select current template.
(2)
<Name>
show the name of the current
template, it can be revised.
HD Param-Parameter
(1)
<Sharpness>
Range from 0 to 255.
(2)
<Focus Mode><Auto>
or
<Manual>
.
(3)
<Day/Night><Auto>
,
<Night>
,
<Day>
.
(4)
<ICR-Sensitivity>
set sensitivity for IR filter,
<Low>
,
<Middle>, <High>
optional. The higher value you set, the faster the IR filter switch.
(5)
<Digital De-noise>
revise the gamma value of image.
<Digital De-noise>
has options of
<Close>
,
<Ordinary Mode>
and
<Expert Mode>
, default is
<Clode>
.When selected
<Ordinary Mode>
,there will be a sliding block to set the de-noise level.
When selected
<Expert Mode>
,there will show sliding block for
<Space-Domain
Denoise>
and
<Time-Domain Denoise>
, drag to set
<Space-Domain Denoise>
and
<Time-
Domain Denoise>
.
Remark Click button
<Save Schedule>
to save all the setting into the template.
(6)
<Wide Dynamic><ON>
,
<OFF>
. When selected
<ON>
, it will enable setting for
<Level>
,there
are High/Medium/Low for selection.
(7)
<White Balance ><Auto>
,
<Manual>
and
<ATW>
.When selected
<Manual>
,there will be 2
sliding blocks to set the white balance, R stand for red gain and B stand for blue gain.
(8)
<Exposure><Auto>
and
<Manual>
(9)
<Light Suppression>
<ON>
and
<OFF>
, suppress the high light.
(10)
<Defog>
<ON>
and
<OFF>
HD Param-Restore Defaults
