User Friendly Anti-Tip Owners Manual
OM_UFAT_0308RevA
USER-FRIENDLY ANTI-TIPS
12
Mounting the User-Friendly Anti-Tip
(SX, X, Evo, and YG Series)
I
WARNING:
Mounting the user-friendly anti-tip receiver must be performed by
an authorized TiLite dealer or qualified technician.
If you ignore this
warning, you may fall, tip over or lose control of the wheelchair and
seriously injure yourself or others or damage the wheelchair.
I
WARNING:
Do not disassemble the anti-tip mounting assembly (see Figure 11).
If you ignore this warning, you may fall, tip over or lose control of
the wheelchair and seriously injure yourself or others or damage the
wheelchair.
NOTE:
Unless you ordered user-friendly anti-tips when you originally
ordered your TiLite SX, X, Evo, YG or YGS you will need to order
replacement Allen Screws when ordering user-friendly anti-tips.
Tools Needed:
• 5/32” Allen Wrench
• 7/16” Open End Wrench
1. Remove the rear wheels and place the frame on a level surface.
2. Remove the Nylock Nuts and Allen Screws that secure the rearward
end of the axle plate to the frame. See Figure 11.
3. Without disassembling the anti-tip mounting plate from the anti-tip
receiver, align the anti-tip mounting plate with the two Allen Screws and
reinstall the Nylock Nuts removed in Step 2.
4.
I
WARNING: Make sure that the TiLite logo is visible on the
rearward side of the user-friendly anti-tip receivers as shown in
Figure 11 and that the white arrows are all aligned on the opposite
(forward) side of the anti-tip components as shown in Figure 11.
If
you ignore this warning, you may fall, tip over or lose control of the
wheelchair and seriously injure yourself or others or damage the
wheelchair.
5. Securely tighten all Allen Screws.
6. Reinstall the rear wheels.
7. With the wheelchair standing upright on a level surface, engage the
anti-tip as described under “Engaging the Anti-Tip” above.
8. Adjust the height of the anti-tip as described under “Adjusting the Anti-
Tip” above.
Figure 11
Mounting the Anti-Tip to the SX, X, Evo and YG
Series
Anti-Tip
Mounting Plate
Anti-Tip
Receiver
Nylock Nuts
Allen Screws
Axle Plate