O
PERATING
M
ANUAL
DAF380
M
AINTENANCE
/S
ERVICE
ThyssenKrupp Aufzugswerke GmbH
7.9
Checking for grease / oil leaks
Check the area around the bearing cover, brake drum, brake linings as well
as the lower and/or inner area of the traction sheave for traces of oil. For the
check, remove the cover plate above the traction sheave!
A small amount of escaping oil means individual drops of oil or traces of oil in
the inner area of the traction sheave / brake drum.
This can be a visual check or a manual check by reaching through the
spokes of the traction sheave.
Contamination level
Procedure
No escaping oil determined
Check regularly within the
framework of maintenance
Every 3 months
(6 months if
elevator used
infrequently,
< 50,000 runs
per year)
If a small amount of
escaping oil is determined
Clean and check regularly
within the framework of
maintenance
Every 3 months
(6 months if
elevator used
infrequently,
< 50,000 runs
per year)
If a large amount of
escaping oil is determined
or oil is escaping from the
brake disc/linings
present
Clean the drive and if
necessary the brake, and
carry out short-term repairs.
Before continuing operation
until modification, run a brake
test. If the braking effect is
inadequate, shut down the
installation.
Repair after
4 weeks at the
latest
Table 7.9.1
44
08-2011
Summary of Contents for DAF 380
