10
Connecting Group 3 Fax Machine to FDU-2500
FDU-2500 can be used for sending and
receiving fax messages when connected
to a Group 3 fax machine at the RJ-11
interface. FDU-2500 includes two RJ-11
interfaces. Group 3 fax machine should
be connected to the RJ-11 interface
marked “FAX”.
1.
Plug one end of the RJ-11
cable to the RJ-11 interface
marked “FAX” on FDU-2500.
2.
Connect the other end of the
RJ-11 cable to the Group 3
fax machine.
Note: Contact your service provider to
check for Fax service on the SIM Card.
Connecting a PC to FDU-2500 through USB port
You can use your FDU-2500 for
connecting a PC through the USB
interface on FDU-2500.
1.
Plug in one end of the USB
cable to the USB port of your
PC.
2.
Connect the other end of the
USB cable to the USB
interface of FDU-2500.
To use USB interface, install the USB
driver for FDU-2500 in the PC. USB
driver is included in a CD which is
provided with the product.
Note: Contact your service provider to
check for Data service on the SIM Card.
Docking Thuraya Terminal in FDU-2500
For successful operation of FDU-2500,
Thuraya terminal must be in ‘SAT Only’
mode and data link rate is set to 19200
Baud.
Note: Ensure that the Dust cap behind the
Thuraya
terminal
is
removed
before
attempting to dock.
1. Place Thuraya terminal with the
display facing up.
2. Gently lower the Thuraya terminal
into the docking cradle provided
on FDU-2500, coupling the
antenna hole with the antenna
connector. Switch on FDU-2500.
Introduction
Package Contents
Installation Instructions
Getting Started
Receiving / Making Calls
F
ax Message
