Atlas IP+ Terminal User Manual
Page 41 of 106
b. Enter
Incoming Port
number in the space provided.
(For example, the user is expecting HTTP traffic, the port is 1001).
c. Enter the Destination IP Address.
(For example, the IP Address of the PC that is connected to the terminal).
d. Select
Protocol
:
TCP
/
UDP
. (E.g. for HTTP, it will be TCP).
e. Enter
Destination Port
number in the space provided (For example: listening
port of the particular service (for example TCP port 80 for web server) on the
PC that is connected to the terminal).
f. Click
Apply
to allow the settings to take effect.
Firewall
Firewall feature is used for motoring and control of the incoming and outgoing network
traffic based on predetermined security rules.
Enable Firewall Settings
a. Navigate to
Data>Firewall>Setup
to enable Firewall protection. (By default, the
Firewall
is disabled.)
b. Select
Enable
.
c. Click
Update
.
