INSTALLATION
14
Figure 1-9, Connecting the Power to Enclosure.
Step 3. Connecting Monitor Port (Optional)
You can connect LAN port to the manager clinet system to
configure and manage the RAID storage from the clinet system
through out-of-band manager.
• LAN Port Connection
User can remote manage the RAID enclosure without adding
any user specific software (platform independent) via standard
web browsers directly connected to the 10/100Mbit RJ45 LAN
port. Connect LAN port of the ThunderBox 400 using the
included
Ethernet cable and then to a LAN port or LAN switch.
Step 4. Connecting RAID Storage Power
To power the RAID storage:
1. Using the included power cord, connect this power cord to a
grounded electronic outlet and to the ThunderBox 400 RAID.
2. ThunderBox 400 RAID will automatically turn on when the host
computer power on status is received from the thunderbolt
cable. It takes about 30 seconds to fully start up the RAID.
3. ThunderBox 400 RAID storage automatically turns off when the
computer to which it is attached sleeps or is disconnected.
