Thunder 75P-T6-Multi-Charger, Manual

Page: 2 / 37

cells of NiCd/NiMH and 6 series of Lithium batteries with
maximum current of 5A. But there might be the limit of
feeding current to a higher voltage of battery. Please
refer to “Maximum circuit power charge”.
Individual voltage balancer for Lithium batteries
inside
It has an individual-cell-voltage balancer inside. So it
does not need any balancer separately when charging
Lithium batteries (Lilon/LiPo/LiFe) for cell voltage
balancing.
Balance individual cells on discharge
It also can monitor and balance individual cells of the
Lithium battery pack during the discharge process. If the
voltage of any one cell varies abnormally, the process
will be stopped with the error message.
Accept various types of Lithium battery
It can accept three types of Lithium batteries: Lilon,
LiPo and LiFe. They have different characteristics by
their chemistry. You can select any one of them that
you are going to process before the job. For their
specifications, refer to “Warnings and safety notes”
section.
Lithium battery “Fast” and “Storage” mode
You can charge Lithium battery for special purposes.
“Fast” charge reduces the charging time of Lithium
battery and “Storage” mode controls the final voltage of
the battery to be suit for long time storage.
Maximum safety
Delta-peak sensitivity: The automatic charge