Thunder 75P-T6-Multi-Charger, Manual

Page: 14 / 37

When you start a charge process, the integral safety
timer automatically starts running at the same time. This
is programmed to prevent
overcharge the battery if it
proves to be faulty, or if the
termination circuit cannot
detect the battery full.
Please refer the statement
in below to calculate the
time setting.
This program sets the
maximum charge capacity
that will be supplied to
the battery during charge.
If the delta-peak voltage
is not detected nor the
safety timer expired by any
reason, this feature will
automatically stop the process at the selected capacity
value.
The beep sounds at every
time pressing the buttons
to confirm your action. The
beep or melody sounded
at various times during
operation to alert different
mode ch ange s. These
audible sounds can be on
or off.
Key Beep ON
Buzzer ON
Display
- +
DEC INC
DEC INC
Display
Capacity Cut-Off
ON 5000mAh
Display
- +
DEC INC
- +
DEC INC
Display
DEC INC
Safety timer
ON 120min
Display
- +
DEC INC
- +
DEC INC
Display
DEC INC