THUNDER TIGER TITAN X50 - Instruction Manual Download Page 3

-2-

INTRODUCTION / 

簡介

Thank you for purchasing the Thunder Tiger Titan X50 engine R/C helicopter. This new helicopter is the 
latest innovation by Thunder Tiger.  It has the perfect combination of flying stability and the agility for 3D 
flying.  This helicopter is an excellent choice for flying enthusiasts like you.  For convenient assembly and 
safe operation of the helicopter, please read the instructions carefully.  Retain the user manual in case you 
need it for any information or reference.

感謝您購買雷虎科技Titan X50直昇機產品,本項產品為雷虎科技全新開發機種,兼具高度穩定性與3D飛行特性,是
熱衷引擎直昇機的您不可錯過的選擇。請於使用本產品前詳盡閱讀使用手冊,以利於組裝工作順暢進行與安全操控本
產品。請妥善保存使用說明書,以利後續調整與維修參考用途。  

CAUTION / 

警告

1. R/C models are not toys.  This product is a high-precision flying machine. Possibilities of unexpected 

crashes may occur due to electronic interference,  incorrect operation, or poor mechanical maintenance. 
Although it is a small-sized helicopter, the rotor blades rotate at high speeds, which may cause serious 
damage, injury, or death if the model hits people or property. Therefore, extreme  caution must be 
exercised during operation.

2. Thunder Tiger ensures parts packaged in this product is of the highest quality. However, after assembly 

and usage, parts damaged due to wear or misuse will not be replaced under any circumstances. If you 
have any questions regarding    its operation and repair, Thunder Tigers service agents are able to 
provide free technical guidance.

3. This product is only recommended for users ages 16 and up. Because flying a R/C helicopter is difficult, 

beginners must receive guidance and supervision from experienced pilots to minimize unexpected danger.  
Practice in spacious areas, far away from obstacles such as buildings, trees, electrical towers, or crowds.

4. To decrease the cost of repair and maintenance for beginners, it is recommended  to fly the helicopter 

with a practice rack and to learn basic flying skills with a computer R/C flying simulator. (Crashes in 
simulators are free to repair!)

1. 本項遙控直昇機產品並不是玩具,是一項結構精密、高專業度模型產品,如果未經正確組裝與操控,將可能對操控

者或其他人造成身體傷害。使用者必須了解,若未確實進行飛行前安全檢查或操控不當,而造成人員受傷或物體損
壞,使用者必須負起法律責任。

2. 本產品由高品質零組件組成,雷虎科技對於安裝過程、使用過後..等人為因素造成損壞事件不負損壞賠償之責。如您

需要本產品相關組裝、調整或其他協助,可與雷虎科技全省經銷商聯繫。

3. 本項產品禁止十六歲以下青少年與孩童使用。強烈建議初學者應取得技術支援後再進行飛行,以避免危險發生。請

於空曠地區操控本產品,並避免於建築物、樹木、電塔..等障礙物區域飛行。

4. 建議初學者可安裝練習架或透過電腦模擬軟體練習,可達到實際練習效果與符合經濟效益。

AMA INFORMATION / 

特別注意事項

Operating a model helicopter requires a high degree of responsibility and skill.  If you are a newcomer to the 
hobby, it is best to seek help and guidance from accomplished model helicopter pilots.  This will greatly 
speed up the learning process and have you flying successfully in a reasonable amount of  time. We also 
would strongly urge you to join the Academy of Model Aeronautics.  The AMA is a non-profit organization 
that provides its members with a liability insurance plan as well as monthly magazine entitled Model Aviation.  
All AMA charter aircraft clubs require all pilots to hold a current AMA sporting license prior to operation of 
their models at club fields.  For further information, contact the AMA at:
Academy of Model Aeronautics
5151 East Memorial Drive
Muncie, IN 47302
(317) 287-1256

操控遙控直昇機對於飛行安全要求極高,需要高度的負責任態度配合,以及較高的操控技巧。如果您是一位初學者,
建議您必須向當地專業模型經銷商,或是遙控直昇機相關組織以及經驗豐富的玩家尋求相關協助,以獲得您所需要的
訊息以及專業知識。如此可有效協助您縮短學習的時間,更容易學會遙控直昇機的組裝、設定與操控技巧。 

All manuals and user guides at all-guides.com

Summary of Contents for TITAN X50 -























































Reviews: