9
a.
Check the radio steering functions. With the radio transmitter and receiver on, turn the steering wheel/stick to the left. The front
tires/wheels should turn left accordingly. If not, flip the steering servo reverse switch.
b.
Return the steering wheel/stick to neutral. The front tires/wheels should point straight forward. If not, use the steering trim lever to
correct it.
c.
Turn the steering wheel/stick to the right. The front tires/wheels should turn right accordingly.
a.
將發射機與接收機電源開關打開，以確認遙控器功能是否正常。方向舵向左邊旋轉時，前輪應向左偏擺（如圖示），若方向不一
致，請調整方向舵正逆轉開關。
b.
方向舵轉回中立點時，前輪應筆直向前，若有偏差，請調整方向舵微調旋鈕。
c.
方向舵轉向右邊時，前輪應轉向右邊。
OPERATING RADIO STEERING FUNCTION
遙控器設定－轉向
8
a
b
c
OPERATING RADIO THROTTLE/ BRAKE FUNCTION
遙控器設定－油門、中立、煞車
9
a.
Check the radio throttle/brake functions. With the radio transmitter and receiver on, pull the trigger / push the stick forward. The
carburetor should be fully opened and the brake disengaged. To reverse this function, flip the throttle/brake servo reverse
switch.
b.
Return the trigger / stick to neutral. The carburetor should be closed to a point where the idle has been set (see step 8 for
settings), and the brake still disengaged. If not, use the throttle/brake trim lever to correct it.
c.
Push the trigger / pull the stick backward. The carburetor opening should still be the same at neutral, throttle spring compressed
slightly, and the brake engaged.
a.
確認油門、煞車功能。請先將發射機與接收機電源開關打開，以檢查油門、煞車作動是否正常作動。將油門板機(桿)向內拉上推
底時，化油器應完全開啟，煞車脫離（可輕輕轉動輪子，確認煞車是否完全脫離），若方向不一致，請調整油門的正逆轉開關。
b.
將油門板機(桿)推回中立點時，化油器應關閉至定點，煞車仍為脫離狀態；若狀態有所偏差，請調整油門微調鈕。(油門、煞車連
的正確設定，請參考步驟8)
c.
油門板機(桿)向煞車方向推時，化油器應關閉至定點，但煞車須為鎖死狀態。
a
b
c
Summary of Contents for EB-4 S2.5 6242-F
Page 17: ...16 SET UP 22...
Page 20: ...19 REAR ASSEMBLY PD08 0017 PD1924 PD1981 W PD1924 PD1981 W PD1244 PD0560 T 1...
Page 31: ...JD8524...
