THUNDER LASER
MARS-120
www.thunderlaser.com
THUNDERLASER TECH CO., LTD
Tel :(86)755 82689501
31
4.3 How to use the display
4.3.1 Function of the Buttons
Arrow buttons: control the movement of the laser
head.(also can be used to change the parameters in the control panel)
Laser button: single press to draw a dot, press and hold to drill a hole.
Origin button: set the starting point for the laser head.
Box button: trace the path of the current job. Help user to put the material
on the correction position before starting the job.
Start/Pause button: run/pause the current job.
Files button: select a file saved in the memory of the controller.
Enter button: confirm your selection.
