9
1. Install a standard 8.5" roll of headpiece
paper, as shown.
2. Raise the paper hold-down wire and
tear-off bar. Advance the paper and tuck
it between the cushions.
3. Lower the hold-down wire between the
cushions, lower the tear-off bar and tear
off excess paper. See step 5.
4. To advance the headpiece paper, raise
the tear-off bar, hold your finger on the
paper hold-down wire and pull the
paper across the cushions. Pulling the
paper in an upward direction will
reduce friction making it easier to pull.
CORRECT TABLE POSITIONING BEFORE SETTING UPRIGHT
5. To tear off used headpiece paper, use an
upward motion while holding down the
tear-off bar.
SET THE TABLE UPRIGHT:
Tilt the table away from you and onto its feet.
HEADPIECE PAPER
Table Set-Up & Headpiece Operation
9